Solids Control Equipment significantly reduce Mud Costs and Waste Disposal Costs.

ORS offers a complete line of high quality solids control equipment (SCE).

Our equipment delivers a reliable & field proven performance to the drilling operations, ranging from enhanced drilling fluids properties, to lowering mud dilution rates, to removal of drier solids from the fluid and taking into consideration the oilfield industry’s environmental and economical pressures.

We provide a complete line of solids control equipment, comprising:

  • Shale Shakers
  • Desilter
  • Decanting Centrifuges
  • Desander
  • Mud Cleaners
  • Vacuum Degasser

  • Mud Agitator
  • Mud Gas Separator
  • Vertical Cuttings Dryers
  • Decanter Centrifuges
  • Screens
  • Mud systems

Shale Shakers

Cascade Shaker System

×

500/5000 B4 Linear Power Cascade Unit

500-5000 B4 Linear Power Cascade Unit

SERIES 500/5000 B4 LINEAR POWER CASCADE UNIT
MODEL B4
MOTORS Four each 1800, 1500, OR 1200 rpm explosion proof
BEARINGS Permanently sealed and lubricated
MOTION Linear , 0.23″ A (1200), 0.156″ A(1500), 0.13″A(1800), 5.0 “G”
VGS Force adjustable to 8.0 “G” maximum
DECK ADJUSTMENT 0o to 5o (uphill)
SCREENS Seven each 42″ x 29″ pretensioned panels with WedgelokTM fasteners
SCREENING AREA 59.4ft2 (5.51m2)
OVERALL DIMENSIONS 133 ¾” (2988mm) L x 73 ¾” (1870mm) W x 95 ½ “(1091mm) H
WEIR HEIGHT 83 ¼”
×

50/500B Linear Power Cascade Unit

50-500B Linear Power Cascade Unit

SERIES500/5000 B4 LINEAR POWER CASCADE UNIT

MODEL B4
MOTORS Four each 1800, 1500, OR 1200 rpm explosion proof
BEARINGS Permanently sealed and lubricated
MOTION Linear , 0.23″ A (1200), 0.156″ A(1500), 0.13″A(1800), 5.0 “G”
VGS Force adjustable to 8.0 “G” maximum
DECK ADJUSTMENT 0o to 5o (uphill)
SCREENS Seven each 42″ x 29″ pretensioned panels with WedgelokTM fasteners
SCREENING AREA 59.4ft2 (5.51m2)
OVERALL DIMENSIONS 133 ¾” (2988mm) L x 73 ¾” (1870mm) W x 95 ½ “(1091mm) H
WEIR HEIGHT 83 ¼”

Shale Shakers

×

500B LINEAR POWER SHAKER

500B LINEAR POWER SHAKER

SERIES
50 LINEAR POWER SHAKER
500 LINEAR POWER SHAKER
5000 LINEAR POWER SHAKER
MODEL B4 B4 B4
MOTORS Two each 1800, 1500 or 1200 rpm exp. proof or non-exp. Proof available Two each 1800, 1500 or 1200 rpm exp. proof or non-exp. proof available. Two each 1800, 1500 or 1200 rpm exp. proof or non-exp. proof available
STANDARD ELECTRICAL
REQUIREMENTS
240/480 volt, 60Hz, 3 phase 380 volt, 50Hz, 3 phase 240/480 volt, 60Hz, 3 phase , 380 volt, 50Hz, 3 phase 240/480 volt, 60 Hz, 3 phase ,380 volt, 50Hz, 3 phase
BEARINGS Permanently sealed and lubricated. Permanently sealed and lubricated. Permanently sealed and lubricated
MOTION Linear, 0.13″ A( 1800), 0.156″ A (1500), 0.23″ A (1200), 5.0 “G” Linear, 0.13″ A( 1800), 0.156″ A (1500), 0.23″ A (1200), 5.0 “G” Linear, 0.13″ A (1800), 0.156″ A (1500), 0.23″ A (1200), 5.0 “G”
VGS Force adjustable to 7.0 “G” maximum Force adjustable to 8.0 “G” maximum Force adjustable to 7.0 “G” maximum
DECK ADJUSTMENT Adjustable 0o to 5o adjustable Adjustable 0o to 5o adjustable Adjustable 0o to 5o adjustable
SCREENS Two 42 in x 29 in pre-tensioned panels with WedgelokTM fasteners Three 42 in x 29 in pre-tensioned panels with WedgelokTM fasteners Four 42 in x 29 in pre-tensioned panels with WedgelokTM fasteners
SCREENING AREA 16.9 ft2 (1.57 m2) 25.4 ft2(2.36 m2) 34.0 ft2 (3.16 m2)
OVERALL DIMENSIONS 88 ½” L x 68 7/8″ W x 42 7/8″ H (2248 mm x 1747 mm x 1087 mm) 117″ L x 73 5/8″ W x 43″ H (2988 mm x 1870 mm x 1091 mm) 146 7/8″ L x 61″ W x 54 5/8″ H (3729 mm x 1549 mm x 1967 mm)
AVERAGE WEIGHT 2300 lbs (858 kg) 2900 lbs (1082 kg) 4600 lbs (1717 kg)
WEIR HEIGHT 29″ 29″ 38″

Replace-A-Bed™

×

Replace-A-Bed A50

Replace-A-Bed A50Our Replace-A-BedTM retrofi ts shaker baskets of some competitors machine at a fraction of cost if it would take you replacing the entire machine. If your shaker basket is in bad shape which affects the performance of your equipment, switch to our balanced and simple design Replace-A-BedTM

SERIES
A50B
A500B
MODEL Series A50B Upgrade Kit Series A500B Upgrade Kit
MOTORS two permanently sealed two permanently sealed
STANDARD ELECTRICAL
REQUIREMENTS
240/480 volt, 60 Hertz, 3 phase, 380 volt, 50 Hz, 3 phase 240/480 volt, 60 Hertz, 3 phase, 380 volt, 50 Hz, 3 phase
SCREENS two 29″ x 42″ pretensioned panels three 29″ x 42″ pretensioned panels
SCREENING AREA 16.9 ft2 [1.57 m2] 25.4 ft2 [2.36m2]
OVERALL DIMENSIONS 70″ L x 68 7/8 ” W x 20″H [1778mm x 1747mmx 508mm] 100″ L x 73 5/8 ” W x 24″ H [2540mm x 1870mm x 610mm]

One-Lift Skid System

×

One-Lift Skid System

getImageThis three-piece unit combined into one integral assembly can be lifted
and mounted as single unit for economy of time and motion. This reduces
assembly time, shaker alignment and positioning at the rig site.
Its fl ow distribution can be controlled by slide gates.Overall dimensions: 250 1/4 “ x 154 3/4” x 137”
6356mm x 3931mm x 3479m
Weight: 21,500lbs[9773 kg] approx.
Weir Height: 37 15/16”

Mud Cleaners

×

5000 Mud Cleaner

SERIES
5000 Mud Cleaner
MODEL B4 DHC
MOTORS Two each 1800, 1500 or 1200rpm
exp. proof or non-exp. proof available
STANDARD ELECTRICAL
REQUIREMENTS
240/480 volt, 60Hz, 3 phase
380 volt, 50Hz, 3 phase
BEARINGS Permanently sealed and lubricated
MOTION Linear, 0.13″ A(1800), 0.156″ A
(1500), 0.23″ A(1200), 4.5 “G”
VGS Force adjustable to 8.0 “G” maximum
DECK ADJUSTMENT Adjustable 0o to 5o uphill
SCREENS Four each 29″ x 42″ pre-tensioned panels with WedgelokTM fasteners
SCREENING AREA 34 ft2(3.16 m2)
OVERALL DIMENSIONS 131 ½” L x 65 ½” W x 105 5/8 “H
3340mm x 1664mm x 2681mm
AVERAGE WEIGHT 6635 lbs (3016 kg)
×

500 Mud Cleaner

SERIES
5000 Mud Cleaner
MODEL B4 DHC
MOTORS Two each 1800, 1500 or 1200rpm
exp. proof or non-exp. proof available
STANDARD ELECTRICAL
REQUIREMENTS
240/480 volt, 60Hz, 3 phase
380 volt, 50Hz, 3 phase
BEARINGS Permanently sealed and lubricated
MOTION Linear, 0.13″ A(1800), 0.156″ A
(1500), 0.23″ A(1200), 4.5 “G”
VGS Force adjustable to 8.0 “G” maximum
DECK ADJUSTMENT Adjustable 0o to 5o uphill
SCREENS Four each 29″ x 42″ pre-tensioned panels with WedgelokTM fasteners
SCREENING AREA 34 ft2(3.16 m2)
OVERALL DIMENSIONS 131 ½” L x 65 ½” W x 105 5/8 “H
3340mm x 1664mm x 2681mm
AVERAGE WEIGHT 6635 lbs (3016 kg)
×

5000 The Eliminator

SERIES
500 Mud Cleaner
MODEL B4NP102DHC
MOTORS Two each 1800, 1500 or 1200rpm
exp. proof or non-exp. proof available
STANDARD ELECTRICAL
REQUIREMENTS
240/480 volt, 60Hz, 3 phase
380 volt, 50Hz, 3 phase
BEARINGS Permanently sealed and lubricated
MOTION Linear, 0.13” A(1800), 0.156” A
(1500), 0.23” A(1200), 4.5 “G“
VGS Force adjustable to 8.0 “G” maximum
DECK ADJUSTMENT Adjustable 0o to 5o uphill
SCREENS Three each 29” x 42” pre-tensioned panels with WedgelokTM fasteners
SCREENING AREA 25.4 ft2(2.36 m2)
OVERALL DIMENSIONS 109 7/8” L x 73 ¾” W x 90” H
2789mm x 1873mm x 2287mm
AVERAGE WEIGHT 4050 lbs (1841 kg)

Desanders / Desilters

×

DSR

dsrSERIES: DSR
No. of cones available: 1 to 4 per header
Inlet Size: Depending on no. of cones
Outlet Size: Depending on no. of cones
Overall dimensions:52” x 32” x 76”
Cone Capacities: 500 GPM (1892.70 lpm) per cone
Cone construction: High durameter cast polyurethane
Weight: 550 lbs. ( 249 kg)
×

SSR

dsrSERIES: SSR-K
No. of cones available: 1 to 16 per header
Inlet Size: Depending on no. of cones
Outlet Size: Depending on no. of cones
Overall dimensions: Depending on no. of cones
Cone Capacities: 100 GPM(378.5 lpm)
@ 40psi (2.8kg/sq.cm)
Cone construction: High durameter cast polyurethane
Weight: 675 lbs. ( 306 kg)
×

SSR Desilter S

ssrSERIES: SSR Desilter S
No. of cones available: 1 to 20 per header
Inlet Size: Depending on no. of cones
Outlet Size: Depending on no. of cones
Overall dimensions: 56” x 35” x 65”
Cone Capacities: 60 GPM(227 lpm)
@ 40psi (2.8kg/sq.cm)
Cone construction: High durameter cast polyurethane
Weight: 975 lbs. (442 kg)

Cutting Driers

3D Double Deck

×
3D Double Deck

SERIES
29126
MODEL 3D
MOTORS Two each 1800 rpm exp. proof or non-exp.
proof available
BEARINGS Permanently sealed and lubricated
MOTION Linear, 0.13” A, 4.5 “G” , 20Hz
VGS Force adjustable to 10.0 “G” maximum
SCREENS Six each 29” x 42” pre-tensioned panels with Wedgelok™ fasteners
SCREENING AREA 50.7 sq.ft. (4.7 sq.m)
OVERALL DIMENSIONS 140” L x 63 9/16” W x 54 1/4”H
AVERAGE WEIGHT 7600 lbs (3447 kg)

5000 B CD

×
5000 B CD

SERIES
29126
MODEL 3D
MOTORS Two each 1800 rpm exp. proof or non-exp.
proof available
BEARINGS Permanently sealed and lubricated
MOTION Linear, 0.13” A, 4.5 “G” , 20Hz
VGS Force adjustable to 10.0 “G” maximum
SCREENS Six each 29” x 42” pre-tensioned panels with Wedgelok™ fasteners
SCREENING AREA 50.7 sq.ft. (4.7 sq.m)
OVERALL DIMENSIONS 140” L x 63 9/16” W x 54 1/4”H
AVERAGE WEIGHT 7600 lbs (3447 kg)

Vertical Cuttings Dryer

ssr×The substantial reduction in liquid/oil adhesion ranges from 6% to as low as 1% oil by weight.
– Size: 99 1/16” L x 87 7/8” W x 67 ¼”H
– Weight: 7,700 lbs
– Screen Area: 13.3 sq. ft.
Oil Pump Motor Specifications:
– Weight:27lbs.
– Horsepower: ½
– Classification:
Explosion proof
Class 1
Division1

Degasser

Atmospheric Degasser

ssr×Atmospheric Degassers remove retained gas from drilling muds. The DSDG atmospheric degasser degasses mud by accelerating fluid through a submerged pump impeller and impinging the fluid
on stationary baffl es to maximize surface area and thus enable gasses to escape to the atmosphere.
As with all processing equipment the process rate is dependent upon solids content and fl uid viscosity. Processing rates are therefore dependent on mud properties.

ARound Vacuum Degasser

ssr×Our vacuum degasser operates on a “thin strata” principle. The drill mud enters the tank , forces it to flow and distributed to a layer of internal baffle plates engineered to allow the liquid inside the vacuum degasser to flow as thin fi lm and is exposed to the vacuum within the vessel. This layer of mud allows the gas to escape or break out of the mud . The vacuum pump releases the gas and discharge it to the disposal line. Mud exits the vessel under the action of the venturi and is returned to the mud system.FSI vacuum degasser operates in three functions – mud circulation, vacuum creation and gas removal. The venturi nozzle at the discharge piping creates vacuum within the vessel and circulates mud by drawing
entrained bubbles in the mud into the the vessel. The vacuum pump runs continuously removing gas from the vessel discharging it to the rig’s fl are or environmental control system.It is a compact , skid-mounted and self-contained unit designed to separate and vent trip gas and heavily gas cut mud. Its series of baffles are made of corrugated fi berglass infused with epoxy for long life with access plate for easy maintenance of the vacuum degasser.
5 hp or 7.5hp motor 60 Hz 480 volt 3 phase with starter and fan guard.
up to 29” Hg performance for viscous fluids.
epoxy coated internal surface resist corrosion.
fail-safe overfl ow valve.
low maintenance fl oat assembly.
easy access to baffl es and fl oat switch.
compact design for easy placement.
skid, self-contained unit.
minimum moving parts for reliable operation.
4000 lbs. average dry weight.

Centrifuges

CD 40S

ssr

  • Un-weighted mud solids control
  • Weighted mud density control
  • Recover liquid from effluent during series dual centrifuging application
  • Dewatering applications using chemical flocculants (polymer)

Centrifuge Model: CD 40S(15in x 51in)
×

Actual flow rate: depending on mud, solids, etc
Length: 3.100 mm (122in)
Width: 1.115mm(44in)
Height: 1.690mm(66.5in)
Housing: Carbon Steel(split case)
Liquid and solids discharge: AISI 304
Bowl Material: X3 CrNiMo 13.4
Internal Screw: AISI 304
Screw flight coated from both side with tungsten carbide
Bowl Diameter: 380 mm(15in)
Bowl length: 1.300 mm(51 in)
Slenderness ratio: 3,4
Bowl max. speed: 4200 rpm
Differential speed: 0.1 to 55 rpm
Bowl powered by belt transmission and electric motor
Electric motor: 22 kW(30hp)34A, 4 poles-IP55
Start by inventer
Solids scraper: 0.3 kW
Ball bearings: SKF-NSK
Gear box: Cyclo
Vibration isolators under decanter frame
Noise level: 80dB
Weight (not including oilfield skid): 1,800kg(4000lbs)
Electric Board(Explosion Proof): II 2GD EExd-II B-T5
Voltage: 480 V 60Hz 3 Phase/50Hz available
Vibration control
Oilfi eld Skid
Manual in English
Option: Fully hydraulic(alternative)

CD 40

ssr

  • Recover barite while discarding drilled solids
  • Recover liquid from micro-cyclone discard
  • Discard drilled solids from un-weighted mud

Centrifuge Model: CD 40(15in x 51in)
×

Actual flow rate: depending on mud, solids, etc
Length: 3.450 mm (136in)
Width: 1.115mm(44in)
Height: 1.690mm(66.5in)
Housing: Carbon Steel
Liquid and solids discharge: AISI 304
Bowl Material: X3 CrNiMo 13.4
Internal Screw: AISI 304
Screw flight coated from both side with tungsten carbide
Bowl Diameter: 380 mm(15in)
Bowl length: 1.300 mm(65 in)
Slenderness ratio: 4,3
Bowl max. speed: 4000 rpm
Differential speed: 0.1 to 55 rpm
Bowl powered by belt transmission and electric motor
Electric motor: 30 kW(40hp)34A, 4 poles-IP55
Start by inventer
Solids scraper: 0.3 kW
Ball bearings: SKF-NSK
Gear box: Cyclo
Vibration isolators under decanter frame
Noise level: 80dB
Weight (not including oilfield skid): 2,000kg(4500lbs)
Electric Board(Explosion Proof): II 2GD EExd-II B-T5
Voltage: 480 V 60Hz 3 Phase/50Hz available
Vibration control
Oilfi eld Skid
Manual in English
Option: Fully hydraulic(alternative)

Screens

Screen panels

ssrOur screen panels are available for most shale shakers. All screens are manufactured with high quality stainless steel wire mesh, and all wire cloth checked for conformance to tolerances and  visually inspected for weaving flaws.
×
Advanced manufacturing processes and a stringent quality assurance program ensures that only the highest quality screens are shipped. Our panels are made from a high-yield strength steel that far surpasses the present industry standard. State of the art manufacturing facilities to meet stringent ISO, API & ASTM standards
All screens and a wide range of screen meshes are  API RP 13C compliant to ensure the most accurate cut-point designationHighest quality screen cloth chosen specially from world-renowned millsLarge inventory in stock for faster deliveryReusable screen plugs make for easy repair and longer screen life.

Mud Systems

Mud Systems

Image1
×

ORS builds complete Mud Systems, which are used to store liquid mud at a drill site.

The liquid mud is used to: pump down the well to carry solids back up to the surface and over the solids control equipment, lubricate the bit, reduce down hole problems and helps in pressure control.
Mud tanks contain the solids control equipment that remove drilled “solids” from the liquid mud for re-use – similar to an oil filter in a car.

Quick move and customized designs.